Selangor | Shah Alam | Subang Jaya | Tanjong Sepat | Banting | Semenyih | Tanjung Karang | Sabak | Sepang | Kajang | Balakong | Puncak Alam | Kapar | Kerling | Rasa | Bandar Baru Bangi | Putra Heights | Tanjong Malim | Kampung Sungai Lang | Cheras | Bangi | Batang Kali | Bukit Rotan | Salayang | Sekinchan | Seri Kembangan | Beranang | Kuang | Cyberjaya | Ampang Jaya | Serendah | Sungai Besar | Klang | Kuala Selangor | Petaling Jaya | Rawang | Batu Arang | Jenjarom | Bestari Jaya | Kuala Kubu Bharu | Sungai Pelek | Kuang | Puchong | Port Klang | Sungai Ayer Tawar | Dengkil | Sungai Buloh | Telok Panglima Garang | Kundang | Jugra | Bandar Sungai Buaya

• Compact Safety Controller.

• The NE1A-SCPU01-V1 provides 16 built-in safety inputs and 8 built-in safety outputs.
  The NE1A-SCPU02 provides 40 built-in safety inputs and 8 built-in safety outputs.

• Reduced wiring with safety networks. Connect up to 32 Safety Terminals.

A22TK Safety Key Selector Switch uses the same key as the Guard Lock Safety-door Switch, the operator is prevented from forgetting to remove the key. The result is a safer working environment when performing maintenance.

Positive Operating Feel
Original Double Snap Action switch mechanism lets the operator precisely confirm the enable position.

Selection Based on Application
In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch.

• Meets EN ISO 13849-1 (PLe/Category 4) and IEC 61508 (SIL3)

• Safety I/O can be freely placed and combined on the NX bus master and mixed with standard I/O

• Omron’s safety input components that require dedicated controllers can be connected directly

• Sysmac is a trademark or registered trademark of OMRON

For building green control panels
Natural disasters caused by global warming and climate change are became global social issue, that drives over 150 countries and regions worldwide to take action toward decarbonization.Our goal is to reduce greenhouse gas (GHG) emissions toward half by through new ways of building control panels, that key figure of the manufacturing site.

Amazing in Control
High starting torque and torque control capability in open loop mode give you full control of your machine dynamics and performance. Options for all of the major open network systems.

The MX2-V1 delivers 200% starting torque near stand-still (0.5 Hz) and can operate in torque control in open loop mode.

Evolved Heritage
This high performance inverter offers the same usability as the previous model, which allows easy replacement.

Easy replacement
The RX2 Series with the same mounting dimension as the previous model will fit in the existing control panel or mounting location. In addition, the same setting software CX-Drive can be used for the RX2 Series.

• One pole carries 40 A. UL NO contacts (resistive 40 A 480 VAC, 60 Hz, 80,000 operations). EN 60947-4-1 NO contacts (AC1 40 A 440 VAC, 50/60 Hz, 80,000 operations).

• Ideal for supply power to industrial inverters, servo drivers, and other devices, and switching power to motors and other equipment.

• Direct opening mechanism to open contacts in emergencies, such as when they are welded.

• Conforms to EN 60947-5-5.

• Includes a safety lock to prevent misuse.

• Features separate construction that allows the Switch to be separated for easier wiring and one-piece construction that allows easier handling.

A22NE-PD Push-in Plus Terminal Block Models
• The small size of the control panel is realized by conserving space and changing the direction of the wiring.

• Since there is no looseness in the wiring, there is a reduction in the maintenance efforts.

• Clicking feel
• Conforms to U.S. standards (ANSI/RIA R15.06-1999) for 3-position switches
• Can be mounted in two directions
•  

• Sensor type：Through-beam models
• Safety category：See Applicable standards.
• Standard sensing object    Opaque object: 18 mm in diameter or greater
• Lens diameter：Diameter 6.7 mm/diameter 9 mm
• Sensing distance：0.2 to 3 m
• Response time (under stable light incident condition)：1.

• Lineup includes three contact models with 2NC/1NO and 3NC contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
• M12-connector models are available, saving on labor and simplifying replacement.
• Can be used with both standard loads and microloads.

• Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and 3NC contact forms.
•   (Slow-action models with MBB contacts are available.)
• M12-connector models are also available, saving on labor and simplifying replacement.
• Can be used with both standard loads and microloads.

• An incredibly small limit switch with a direct opening mechanism (four-contact construction model).
• High-sensitivity safety limit switch.
• Built-in switches with two- or four-contact construction are available.

• Direct opening mechanism (NC contacts only) added to enable opening contacts when faults occur, such as fused contacts.
• Safety of lever settings ensured using a mechanism that engages a gear between the operating position indicator plate and the lever.

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC+1NO (with door closed)
• Type of cable or connector: PVC cable, length 0.1 m with M12 connector, 8 pole
• Actuator: Actuation distance 5 mm

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC (with door closed)
• Type of cable or connector: PVC cable, 4x0,25 mm²
• Actuator: Actuation distance 5 mm

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC (with door closed)
• Type of cable or connector: PVC cable, length 0.1 m with M12 connector, 4 pole
• Actuator: Actuation distance 5 mm

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC (with door closed)
• Type of cable or connector: PVC cable, length 0.1 m with M12 connector, 4 pole
• Actuator: Without actuator

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC (with door closed)
• Type of cable or connector: M8 connector, 4 poles
• Actuator: Actuation distance 5 mm

• Housing: Technopolymer housing, right side connection
• Contacts: 2NC (with door closed)
• Type of cable or connector: M8 connector, 4 poles
• Actuator: Without actuator