Omron Rectangular Proximity Sensor E2Q6
• Change between any of five sensing directions: front or 90° up, down, left, or right
• Four indicators show the operating status of the Sensor from many directions
Shielding |
Shielded |
Unshielded |
|
Model |
E2Q6-N20[]3-H |
E2Q6-N30M[]3-H |
|
Sensing distance |
20 mm ±10% |
30 mm ±10% |
|
Set distance |
0 to 16 mm |
0 to 24 mm |
|
Differential travel |
15% max. of sensing distance |
||
Detectable object |
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data (Reference Value) on Data Sheet.) |
||
Standard sensing object |
Iron, 60 × 60 × 1 mm |
Iron, 90 × 90 × 1 mm |
|
Response frequency *1 |
150 Hz |
100 Hz |
|
Power supply voltage |
10 to 30 VDC, including 10% ripple (p-p) |
||
Current consumption |
20 mA max. |
||
Control output |
Load current |
200 mA max. |
|
Residual voltage |
2 V max. (at 200 mA load current) |
||
Indicators |
Power indicator (green), detection indicator (yellow) |
||
Operation mode |
NO + NC (Normally open, Normally closed) |
||
Protection circuits |
Power supply reverse polarity protection, output reverse polarity protection, and load short-circuit protection |
||
Ambient temperature range |
Operating and storage: -25 to 70°C (with no icing or condensation) |
||
Ambient humidity range |
Operating and storage: 35% to 95% (with no condensation) |
||
Temperature influence |
±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
||
Voltage influence |
±2% max. of sensing distance at 24 VDC in the range of 24 VDC ±15% |
||
Insulation resistance |
50 MΩ min. (at 500 VDC) between current-carrying parts and case |
||
Dielectric strength |
1,000 VAC, at 50/60 Hz for 1 min. between current-carrying parts and case |
||
Vibration resistance (destruction) |
10 to 55 Hz with a 1.5-mm double amplitude in X, Y, and Z directions |
||
Shock resistance (destruction) |
300 m/s2 3 times each in six directions |
||
Degree of protection |
IEC IP67 *2 |
||
Connection method |
Terminal block |
||
Weight (packed state/Sensor only) |
Approx. 250 g/approx. 230 g |
||
Materials |
Case |
Polyamide (PA) |
|
Sensing surface |
Polyamide (PA) |
||
Terminal base |
Polyamide (PA) |
||
Accessories |
Instruction manual |
Inquiry - Omron Rectangular Proximity Sensor E2Q6