Share:


Telemecanique Inductive proximity sensors XS7-C40FP260

  • Range of Product : Telemecanique Inductive proximity sensors XS
  • Series name : General purpose
  • Sensor Type : Inductive proximity sensor
  • Sensor name : XS7
  • Sensor design : Form 40 x 40 x 117
  • Size : 117 mm
  • Body type : Fixed
  • Detector flush mounting acceptance : Flush mountable
  • Material : Plastic
  • Enclosure Material : Plastic
  • Type of output signal : Discrete
  • Wiring Technique : 2-wire
  • [Sn] nominal sensing distance : 0.59 in (15 mm)
  • Discrete output function : 1 NO or 1 NC programmable
  • Output circuit type : AC
  • Electrical connection : Screw-clamp terminals, 2 x 1.5 mm²
  • [Us] rated supply voltage : 24...240 V AC 50/60 Hz
  • Switching capacity in mA  : 5...500 mA
  • IP degree of protection : IP67 conforming to IEC 60529
  • COMPLEMENTARY
  • Detection face : 5 positions turret head
  • Front material : Plastic
  • Operating zone : 0.00…0.47 in (0…12 mm)
  • Differential travel : 3...20% of Sr
  • Repeat accuracy : <= 3% of Sr
  • Cable entry number : 1 tapped entry Pg 13.5 cable gland
  • Status LED : Output state 1 LED yellow)
  • Supply voltage limits : 20…264 V AC
  • Maximum residual current : 1.5 mA open state
  • Switching frequency : <= 25 Hz
  • Maximum voltage drop : <5.5 V closed)
  • Maximum delay first up : 120 ms
  • Maximum delay response : 30 ms
  • Maximum delay recovery : 20 ms
  • Marking : CE
  • Height : 1.57 in (40 mm)
  • Length : 1.57 in (40 mm)
  • Width : 4.61 in (117 mm)
  • Net Weight : 0.49 lb(US) (0.22 kg)


 Inquiry - Telemecanique Inductive proximity sensors XS7-C40FP260