Share:


Omron Flat Inductive Proximity Sensor TL-W

  • Only 6 mm thick yet provides a sensing distance of 3 mm (TL-W3MC1)

  • Aluminum die-cast models also available

Model

TL-W5MD[]

Sensing distance

5 mm ±10%

Set distance

0 to 4 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on
Data Sheet.)

Standard sensing object

Iron, 18 × 18 × 1 mm

Response frequency *1

500 Hz

Power supply voltage
(operating voltage range)

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

Leakage current

0.8 mA max.

Control
output

Load current

3 to 100 mA

Residual voltage

3.3 V max. (under load current of 100 mA with cable length of 2 m)

Indicators

D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)

Operation mode
(with sensing object
approaching)

D1 Models: NO
D2 Models: NC
Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.

Protection circuits

Load short-circuit protection, Surge suppressor

Ambient temperature range

Operating/Storage: -25 to 70°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC for 1 min between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 500 m/s2 3 times each in X, Y, and Z directions

Degree of protection

IEC 60529 IP67, in-house standards: oil-resistant *2

Connection method

Pre-wired Models (Standard cable length: 2 m)

Weight (packed state)

Approx. 80 g

Materials

Case

Heat-resistant ABS

Sensing surface

Accessories

Instruction manual

 



 Inquiry - Omron Flat Inductive Proximity Sensor TL-W